IESenergy’s series of energy-efficient heat pumps range
from smaller plants with a heat output of 0.5 MW
to very large heat pumps of up to 50 MW, which
can be assembled for even larger plants e.g.
in connection with large power plants.
The energy for heat production is absorbed in natural energy sources. By absorbing the energy from the outdoor air in large dry-cooling plants, the vast majority of the district heating produced at the plant will be 100% fossil-free, while the CO2emissions from the heat production will be reduced considerably.
When the opportunity is present, the energy for heat production can be absorbed in excess heat or by cooling off seawater, wastewater, sewage water or groundwater.
We design and optimize the heat pump system, including with an adaptation in relation to the plant's existing production plant, so that the heating plant achieves the most optimal operation, the highest COP and the best total economy.
We supply both air/water and water/water heat pumps.
The heat pump is dimensioned based on a goal of achieving the highest possible present value of the heating plant's investment.
We build the heat pump system of compressors, motors and other components with the highest possible efficiency, so that the energy for heat production is utilized in the best possible way.